(See user manual for complete dip switch functionality) Switch 6: 2x Converter mode: Up=Disabled or Down=Enabled Switch 5: Revertive mode: Up=Revertive or Down=Non-revertive Switch 4: Redundant fiber mode: Up-Normal or Down=Redundant Switch 3: ALPT: Up=Disabled or Down=Enabled Switch 2: Port 4: 2nd SFP Mode Up=100/1000 or Down=SGMII Switch 1: Port 3: SFP Mode Up=100/1000 or Down=SGMII RJ-45 serial port for Command Line Interface (CLI) of advanced port configuration (115200 baud).Dip switch control of basic feature configuration.Twisted pair ports support IEEE 802.3az Energy Efficient Ethernet for power saving.LEDs indicators for power status per port link, duplex, and activity status and PoE status.Supports Auto-Negotiation, Auto-MDI/MDIX, Active Link Pass Through (ALPT), and Remote Fault Detection.SFP slots can support 100Base-FX, 1000Base-X, or SGMII based (MSA compliant) SFP modules.4-port version offers (2) RJ-45 PoE+ ports and (2) open SFP slots, device can be configured as a 4-port switch (with or without redundant fiber) or as two independent PoE+ media converters in one housing.With redundant fiber enabled, supports a 50ms fail-over time.
Various fiber versions available supporting fixed SC, LC, and open SFP.Supports full 30 Watts of power to each twisted pair port.2-port 10/100/1000 copper to fiber media conversion with IEEE 802.3at PoE+ on the copper port.During a Link Pass Through event, the Auto Power Reset feature will re-set the power to the end PD device, ensuring it is ready to go when the LPT event is corrected. Active Link Pass Through (ALPT) is supported, which is an automatically activated version of Link Pass Through (LPT) that allows the converter to detect the loss of Receive (Rx) signals on either fiber or copper port and propagate the failure to the end devices, preventing the media converter from isolating those link failures. Other features include over-current protection, under-current protection, and fault protection input. The converter is available in 2-port, 3-port, and 4-port versions and includes PD signature sensing and power monitoring features. The SGPAT Series is a 10/100/1000Base-T to 100/1000Base-SX/LX Gigabit Ethernet Media Converter, that easily and affordably facilitates the connection between different types of network cabling, while also injecting PoE power through the copper RJ-45 port.īeing a Power Sourcing Equipment (PSE) device, the SGPAT media converter combines data received over a fiber optic link with 56VDC input power to provide power and data to a Powered Device (PD) over twisted pair cabling while complying with the IEEE 802.3af PoE and IEEE 802.3at PoE+ standard.
0 kommentar(er)
